Instructions

Instructions on how to fill TPU unit

  1. Unscrew cap off TPU unit
  2. Fill up with desired water or liquid up to the 12oz mark indicator and screw cap back tightly.
  3. Fit TPU unit on the specified left or right glove as designated.
  4. Insert nozzle into hole on the inside first, then fit the body of liquid next through the unzippered side.
  5. Check cap is tightly screwed back on before zipping glove shut. MAKE SURE NOT TO ZIP THE TPU UNIT POUCH WITH ZIPPER!
  6. Fill to the 12oz mark- OVER FILLING CAN AND WILL CAUSE LEAKAGE. CAN BE REFRIGERATED. 
  7. Rock on and enjoy hydration at your fingertips! NOTE-